Last reviewed: October 2026
In the early 1900s, the Imperial Gazetteer of India ran into an awkward problem while publishing its own figures. The weight of a seer, it admitted, changed from district to district and sometimes from village to village. So the editors picked one “standard” seer of 80 tolas and used it throughout the book.
Parliament set out to end that confusion with the Standards of Weights and Measures Act, 1956. So when did India adopt the metric system? Most pages give you a single year and move on. The real answer is a chain of dates, and the order of the chain tells you who had to switch first and who got years to adjust.
Quick answer: Parliament passed the Standards of Weights and Measures Act on 28 December 1956. Decimal coins came first, on 1 April 1957. Metric weights then became compulsory step by step, starting with named industries and cities on 1 October 1958. Several references give April 1962 as the point when metric became the rule across the country. The Act never had one start date, which is why the answer changes depending on the page you read.

When did India adopt the metric system? Why the answer has several dates
The 1956 Act came with a clause that let the government switch it on in pieces: different dates for different areas, industries and goods, anywhere within ten years of the Act being passed. So “the date” depends on which piece you count. Here is the sequence, with the source for each step.
| Date | What happened | Source |
|---|---|---|
| September 1955 | Indian Coinage Act amended to allow decimal coins | Press Information Bureau |
| 28 December 1956 | Standards of Weights and Measures Act (Act No. 89 of 1956) passed | Text of the Act |
| 11 January 1957 | India becomes a member of the Metre Convention | BIPM |
| 1 April 1957 | Rupee divided into 100 naye paise | PIB, Nehru Archive |
| 1 July 1958 | Metric weights begin in jute mills and jute forward contracts, the earliest notification listed with the Act | Text of the Act |
| 1 October 1958 | Metric weights compulsory for named industries, government stores and notified cities | Text of the Act, OIML |
| 1 October 1960 | Licences required to make, sell and repair weights; verified metric weights compulsory in notified areas, trades and markets | OIML |
| April 1962 | Commonly cited date for compulsory metric weights and measures across the country | Wikipedia, US Metric Association |
A note on that last row. The 1962 date appears in several references, but we could not find the official gazette notification for it online, and another source places the switch at October 1960 for weights and April 1962 for measures. Treat 1962 as the commonly cited end point, not as a date confirmed from the original notification.
Before 1956: one word, many weights
North India’s old scale looked tidy on paper: 1 maund was 40 seers, and 1 seer was 16 chhatanks or 80 tolas. The trouble was the seer itself. The Gazetteer says its weight varied a great deal, which is why official reports fixed the tola at 180 grains and called the resulting seer the standard one. That standard seer comes to about 2.057 pounds.
British India got a legal standard in 1939. The Standards of Weight Act (Act IX of 1939) defined the tola as 180 grains, the seer as 80 tolas and the maund as 40 seers, and it came into force in 1942. Do the sum and you get a small surprise: 40 seers of 14,400 grains each make 576,000 grains, which is exactly 100 troy pounds.
Prices were spoken differently too. According to the Gazetteer, retail prices were usually given as so many seers to the rupee. When grain got costlier, the rupee stayed the same and the quantity you received shrank. A price per kilo, which feels natural now, is the opposite habit: the weight stays fixed and the money changes.
The idea is older than the law
A letter to the journal Nature in January 1896 claimed that the Government of India had passed a metric Act in 1870-71 and that London refused to approve it. Two weeks later another writer, Richard Strachey, replied that the letter did not state accurately what had happened in those years. Both letters sit behind a paywall, so we cannot settle the 1870-71 story here, and we will not pretend to.
The later campaign is easier to follow. Wikipedia’s page on metrication in India, citing a 1958 book on the decimalisation movement, credits the Indian Decimal Society with pushing the idea through newspapers, journals and debates from the 1930s.
What the 1956 Act actually says
The Act is short, and parts of it are more interesting than the usual summaries suggest. It defined the kilogram and the metre by the international prototypes kept at Sèvres, near Paris, and told the government to make national copies. It fixed the litre, the Celsius scale for temperature, and a carat of one five-thousandth of a kilogram for gemstones.
One rule is easy to miss. Any secondary unit of mass or measure had to be a power of ten of a main unit. That is the rule that made the gram and the tonne legal, and left no room for something like a quarter or a one-and-a-quarter. A quarter kilo is not a unit in the law; 250 grams is. Words like pav, sava and dhai could carry on in conversation, but the legal system would not count in them.
The Act also carried its own exchange rate. Section 16 allowed old values, from the weights in the 1939 Act and from inches, feet, yards, miles and gallons, to be converted into metric at rates listed in its First Schedule. To soften the landing, section 14 let the government allow old weights to be used alongside the new ones for up to three years in a given area or class of goods, but only weights that were already in use.
The Act extended to all of India except Jammu and Kashmir, which later got its own enforcement law in 1961.
The first change was in your pocket
Before 1957 a rupee was 16 annas, an anna was 4 pice, and each pice was 3 pies. That is 192 pies to a rupee. From 1 April 1957 the rupee was divided into 100 naye paise. In a message dated 9 March 1957, Nehru called it “a silent but far-reaching revolution” and said old and new coins would circulate side by side for three years.
On paper the sum was easy: four annas should become 25 naye paise. The PIB feature on decimal coinage records that in small towns of southern India a limited meal priced at four annas became 26 naye paise, and front-bench cinema tickets went the same way. The quarrels over that single paisa were loud enough that a 2007 PIB feature still described them. Coins minted between 1957 and 1964 carry the words “Naya Paisa”. The “naya” was dropped on 1 June 1964.
November 1957: a postponement nobody announced
The weights were meant to start on 1 April 1958. A footnote in the Nehru Archive shows what happened next. On 8 November 1957 Nehru wrote to T. T. Krishnamachari that any change-over “upsets the habits of the people” and asked whether it was wise to add this to existing difficulties within five or six months. On 11 November the Cabinet agreed to postpone by a year and use the gap for publicity.
Five days later Morarji Desai, the minister responsible for the metric system, wrote that a year’s delay meant little, because the system was meant to arrive gradually over nine years. He suggested that no postponement be announced, and Nehru agreed. The notifications published in June 1958 then set 1 October 1958 for the first areas.
In his message of 12 December 1957 for the journal Metric Measures, Nehru promised that the change-over would be phased and gradual. His case for doing it at all was practical: science and industry needed the metric system anyway, and running one system for factories and another for daily life would be confusing and wasteful. The journal, a bimonthly from the Publications Division, was meant to explain the change to the public.
Who switched first, and who came next
The notifications listed with the Act show that the first customers of the metric kilogram were industries and the government, not the neighbourhood shop. From 1 October 1958 the units of mass became compulsory for Indian Airlines and Air India International, for government purchase of stores, and for cotton textile mills, iron and steel factories, engineering firms, heavy chemicals, cement, salt, paper, the Coffee Board, producers of copper, aluminium, lead, antimony and tin, and the sale of raw rubber. Jute had started a few months earlier, on 1 July 1958.

The same notification named places where sales of goods by weight had to go metric: the municipal areas of Bombay, Ahmedabad, Calcutta, Lucknow and Kanpur, among many others, and the whole of Delhi. Even a single district got its own date. Darbhanga in Bihar was notified separately for 15 December 1958.
The OIML bulletin calls 1 October 1960 a landmark. From that day, licences became mandatory to make, sell and repair metric weights and measures, and verified metric weights became compulsory in notified areas, industries, trades and regulated markets. The US Metric Association’s summary says those areas covered more than a fifth of India’s population at the time. The same year, the Standards of Weights and Measures (Conversion of Land) Rules, 1960 moved land records from units like gaz and bigha to acres and hectares.
Getting a country to switch, and keeping shopkeepers honest
A law needs people who follow it. The OIML bulletin describes publicity in towns and villages through documentary films, seminars, posters, newspapers and widely distributed conversion tables, with school teaching among the first places the change was promoted. States passed their own enforcement laws: Bombay, Orissa and Kerala in 1958; Uttar Pradesh, West Bengal and Madhya Pradesh in 1959; Bihar in 1960; Jammu and Kashmir in 1961; Himachal Pradesh in 1969.
Someone also had to check the shops. A training institute for legal metrology officers started in Bihar in 1962, and the Indian Institute of Legal Metrology in Ranchi followed in 1974.
India’s own kilogram, and the chain behind every scale

The kilogram in law has a physical home. India’s national prototype is copy number 57 of the international prototype, a platinum-iridium cylinder. The BIPM lists India as a member of the Metre Convention from 11 January 1957. No. 57 was calibrated in 1955 and supplied to the National Physical Laboratory (NPL) in Delhi in 1958, along with metre bar copy No. 4. A profile in The Caravan magazine reported that the NPL director keeps the key to the vault. The BIPM has re-checked the prototype in 1985, 1992, 2002, 2012 and 2022.
From there the standard travels down a ladder. NPL’s national standards are used to check the reference standards held in six Regional Reference Standards Laboratories (Ahmedabad, Bangalore, Bhubaneswar, Faridabad, Guwahati and Varanasi). These check the secondary standards of state laboratories, which check the working standards kept at district level, which verify the weights and measures traders actually use. NPL also keeps Indian Standard Time.
In 2019 the kilogram was redefined in terms of the Planck constant, so a cylinder in France no longer defines it. NPL still lists No. 57 as the source of India’s mass values, from 1 mg up to 2,000 kg.
What happened to the seer, maund, tola and bigha
The old weight units did not vanish. The law just stopped recognising them. These are the standard values, from the 1939 definition that the 1956 Act converted:
| Old unit | Old definition | In metric |
|---|---|---|
| Tola | 180 grains | about 11.66 g |
| Chhatank | 5 tolas (1/16 seer) | about 58.3 g |
| Pav | 20 tolas (1/4 seer) | about 233 g |
| Seer | 80 tolas | about 933 g (0.9331 kg) |
| Maund | 40 seers | about 37.32 kg |

If you meet a seer or maund in an old family paper or land record, do not assume 933 g or 37.3 kg. Those are the values the law fixed. A local seer could differ, as the Gazetteer made clear.
The pav is the clearest case of a word that stayed while the weight changed. The old pav was about 233 g. Today, “ek pav” in a shop is usually understood as a quarter of a kilogram, which is 250 g. Wikipedia notes that the word survived in exactly this adjusted form. The name stayed, and the quantity quietly grew by about 7 percent.
The tola lives on in gold. A tola is 11.66 g, not 10 g, although you will find websites treating the two as the same. That is a gap of about 17 percent, so read the weight in grams on the bill.
The bigha is the hardest of all. The Gazetteer already said it varied greatly from place to place, and nothing in the metric system fixed that. These are commonly cited figures:
| Place | Commonly cited size of one bigha |
|---|---|
| Hill areas of Uttar Pradesh | about 632 sq m |
| Assam | about 1,338 sq m (14,400 sq ft) |
| Rajasthan (pucca bigha) | about 2,529 sq m (27,225 sq ft) |
That is a fourfold difference for the same word. Official records state area in hectares or square metres, while buying and selling in bigha carries on informally. For a real deal, ask for the local conversion in the revenue records of that area.
Who runs the system today
Under the Constitution, setting the standards of weights and measures is a Union subject (Entry 50 of the Union List), while enforcement sits in the Concurrent List (Entry 33A), so states do the day-to-day policing. In 1972 a committee under S. K. Maitra reviewed the 1956 Act, and the Standards of Weights and Measures Act, 1976 replaced it. The Legal Metrology Act, 2009 later replaced the 1976 Act and the 1985 enforcement Act. It got the President’s assent on 13 January 2010 and came into force on 1 April 2011.
For ordinary traders, the Act means a licence to manufacture, repair or sell weights and measures, and verification and stamping of those weights and measures. Pre-packed goods must declare details such as the net quantity in standard units, the maximum retail price and the month and year of manufacture. State officers periodically verify instruments from petrol pumps to weighbridges to clinical thermometers. If a scale looks wrong, the state Legal Metrology department is the place to complain, and the Department of Consumer Affairs lists the National Consumer Helpline at 1915.
Where the old measures still live
- Land: bigha and acre in conversation, while records use hectares or square metres.
- Property: floor areas are mostly advertised in square feet.
- Height: people still give their height in feet and inches.
- Fever: body temperature is sometimes still read in Fahrenheit.
- Cotton: bulk cotton is traded in candies of 355.62 kg or bales of 170 kg.
- Big numbers: lakh and crore, not million and billion.
Tyre rims and TV screens are measured in inches too, but that is how the whole world does it.
India and the United States: two different roads
People often ask why the US never switched. NIST gives the short answer: Congress made metric use voluntary, which leaves the decision and the pace to individual companies, organisations and people. The Metric Act of 1866 legalised metric measurement, the Metric Conversion Act of 1975 encouraged it, and a 1988 amendment named metric the preferred system for trade and commerce. US law allows either system. Even American customary units are defined from metric ones, with mass, length and volume tied to the metre and kilogram since the Mendenhall Order of 1893.
India’s route was compulsory, scheduled and licensed, area by area. It also had less to defend. If a seer could change from village to village, there was no single national system that people were attached to.
The next time you buy something by weight, look for the verification mark on the scale. It is the last link in a chain that begins with a platinum-iridium cylinder in Delhi, and that chain was built in the years this article covers.
Frequently asked questions
When did India officially switch to the metric system?
Parliament passed the Act on 28 December 1956 and decimal coins started on 1 April 1957. Metric weights began in notified industries and cities on 1 October 1958, and April 1962 is the commonly cited date for the whole country.
Why do some sources say 1957, 1958 or 1960?
Each date marks a different step: coins in 1957, the first industries and cities in 1958, and licensing with compulsory verified weights in 1960.
How many kilograms are a seer and a maund?
By the standard definition a seer is about 0.9331 kg and a maund about 37.32 kg. Local seers could differ.
Is a tola the same as 10 grams?
No. A tola is about 11.66 g. Check the weight in grams on any gold bill.
Does India use inches or centimetres?
Official measurement is metric. Inches and feet remain common in speech for height, floor area and screen sizes.
Who keeps India’s standard kilogram?
The National Physical Laboratory in New Delhi, which holds national prototype kilogram No. 57.
Sources
We checked dates against the text of the Act and official pages wherever we could. Where sources disagree, the article says so.
- Standards of Weights and Measures Act, 1956 (text with notifications)
- Standards of Weight Act, 1939 (text)
- Imperial Gazetteer of India, page on weights and measures (Wikisource)
- Press Information Bureau: Decimal Coinage, a Fascinating History
- The Nehru Archive: Introduction of Metric System, 9 March 1957
- The Nehru Archive: Change-over to the Metric System, 12 December 1957
- OIML Bulletin, July 2024: The importance of metrology, the Indian perspective
- Department of Consumer Affairs: Legal Metrology overview
- BIPM: India, Member State
- CSIR-NPL: Mass metrology
- IMEKO 2010 paper on NPLI mass standards
- The Caravan: India’s most important kilogram
- Nature, 9 January 1896: F. G. Brook-Fox, The Metric System
- Nature, 23 January 1896: Richard Strachey, The Metric System
- NIST: Metrication in Law
- US Metric Association: Metrication in other countries (India section)
- Wikipedia: Metrication in India
- Wikipedia: Indian units of measurement
- Wikipedia: Bigha
- Wikipedia: Standards of Weights and Measures Act, 1976

Hi, I’m Aryan, the writer behind IndiaClarity. I write plain-language explainers on how India’s systems, places and history work. Before I publish, I check facts against primary sources such as official records, Parliament answers, Census data and Acts of law, and I list the sources at the end of each article. If you spot a mistake, write to me at 7brewusaofficial@gmail.com and I will fix it.
1 thought on “How India Switched to the Metric System: What Happened to Seer, Maund, Tola and Bigha”