In March 1992, close to four of every ten route kilometres on Indian Railways ran on a track only one metre wide. By March 2025 that share had fallen to 1.3 percent. The years in between held one of the biggest rebuilding jobs the railways have ever taken on. It is called Project Unigauge, and most passengers have never heard the name.
This article starts with how India ended up with several track widths in the first place. Then it covers why the widest one won, what it cost to bring the rest in line, and which lines were allowed to stay as they were. The figures come from Railway Board data, answers given in Parliament, an audit report by the Comptroller and Auditor General (CAG) and some very old House of Commons records. Every source is listed at the end, so you can check any number yourself.
The short version. Gauge is the distance between the inner faces of the two rails. The main gauge of Indian Railways is 1,676 mm (5 ft 6 in). Cheaper lines were later built to 1,000 mm (metre gauge) and to 762 mm or 610 mm (narrow gauge). Since 1992 most of them have been rebuilt to 1,676 mm, and on 31 March 2025 about 97 percent of the 69,439 route kilometres were broad gauge.
The widths, side by side
Indian Railways sorts its track into three classes, though four different widths are in use. The table also shows the world standard, because most comparisons in this article go back to it.

| Class | Width | In feet and inches | Where you find it today |
|---|---|---|---|
| Broad gauge (Indian gauge) | 1,676 mm | 5 ft 6 in | Almost the whole network, including Vande Bharat trains |
| Metre gauge | 1,000 mm | 3 ft 3⅜ in | 894 route km in March 2025: a handful of branch lines and the Nilgiri Mountain Railway |
| Narrow gauge | 762 mm | 2 ft 6 in | Kalka–Shimla, Kangra Valley, Bilimora–Waghai |
| Narrow gauge | 610 mm | 2 ft | Darjeeling Himalayan Railway, Matheran Hill Railway |
| Standard gauge (world reference) | 1,435 mm | 4 ft 8½ in | Used by most of the world’s railways. India’s bullet-train line is being built to it |
The Nilgiri Mountain Railway is the line that confuses people. Tour sites often call it narrow gauge because it is a small hill train. By the railways’ own classification it is metre gauge, and the Parliament answer of February 2023 lists the Mettupalayam–Udagamandalam section among the metre-gauge sectors. What sets it apart is something else. It is the only rack-and-pinion line in India, and that toothed track is how it climbs the Nilgiri slopes.
Why 1,676 mm and not the world’s 1,435 mm?
Britain settled its own gauge argument by law in 1846. England, Scotland and Wales got 1,435 mm and Ireland got 1,600 mm, after a Royal Commission had weighed the choice against Brunel’s 7 ft broad gauge. India was making the same decision at about the same time and went a different way.
The engineer who advised on it was F. W. Simms, consulting engineer to the East India Company. According to a 1920 study of Indian transport by W. E. Weld, Simms recommended 5 ft 6 in in 1846 as a middle path between Brunel’s 7 ft and the 4 ft 8½ in standard. The reason on record is safety: anything narrower, it was thought, would not stand up to cyclones. Lord Dalhousie, the Governor-General who pushed railways through, had wanted 6 ft. The official railway report of 1870–71 says he favoured 6 ft but that 5 ft 6 in was settled on after much consideration. Some popular accounts tell it the other way round, with Dalhousie proposing 5 ft 6 in himself. The older records point to the version above.
Dalhousie’s minute on introducing railways, dated 4 July 1850, is the document everyone points to. The first passenger line, from Bori Bunder in Bombay to Thane, opened in 1853 on the new gauge, and it was later adopted for the country’s main routes.
India was not the only place to land on this width. The Province of Canada made 5 ft 6 in its official gauge in 1851 and refused subsidies to lines built to any other. In the early 1870s the Canadian lines were converted to standard gauge so that wagons could cross to American railways. Nothing like that pulled India away from its gauge. The neighbours that grew out of the same railways, Pakistan, Bangladesh and Sri Lanka, were built to the same width.
How the metre gauge got in
The first trunk lines were expensive. In March 1873 the House of Commons heard that the roughly 5,000 miles of main-line railway had cost about £90 million, between £16,000 and £17,000 a mile. Another member put the average Indian figure at £17,000 to £18,000 a mile, double the original estimate, and said the Indian taxpayer had already paid £17.5 million in interest on the guarantee between 1856 and 1869.
Lord Lawrence, the Viceroy until early 1869, used his last minute in office to warn about the way capital costs on the guaranteed railways kept growing. His successor, Lord Mayo, went further. His case, according to the 1870–71 railway report, rested mainly on economy, and the government’s orders of January 1871 made the metre gauge (3 ft 3⅜ in) the choice for new lines. Writing privately that same month, Mayo described the choice as “cheap railways or none”, a line quoted back in the Commons two years later.
How much did the narrower track really save? Less than the argument suggests. The government’s estimate for the gauge alone was about £1,000 a mile. The MP Samuel Laing, who brought the matter to the House, said that saving would shrink once the cost of extra rolling stock and of changing gauge later was counted. He quoted the engineer Hawkshaw’s prediction that India would end up spending more to fix a break of gauge than it saved by creating one. On the Punjab lines, estimates of the saving swung from £30,000 in one engineer’s sum to about £2 million in another’s.
The debate on 7 March 1873 was about one junction. At Lahore the broad gauge would meet the metre-gauge lines to Peshawar and Karachi. Laing’s motion against a break of gauge there was withdrawn without a vote, and the metre gauge went ahead. Princely states and smaller companies went narrower still, laying 2 ft 6 in and 2 ft lines for branches and hill routes because they were cheaper to build.
At independence the three classes were almost evenly matched. India inherited 25,170 route km of broad gauge, 24,153 km of metre gauge and 5,225 km of narrow gauge, which is 46, 44 and 10 percent of the network.
What a break of gauge looked like on the ground
Where two gauges met, wagons could not roll across. Goods were unloaded, carried over and loaded again, and passengers changed trains with their luggage. In the 1873 debate the Under-Secretary of State for India, Grant Duff, argued that the cost was small. He quoted an estimate of 4d a ton as the most that handling could cost, and worked out that all the traffic at Lahore would add up to about £850 a year in harm.
That was one junction in 1873. Spread it over a country where each gauge ran for tens of thousands of kilometres and the sum stops looking small. By the early 1990s the railways’ own accounts made the case. The CAG’s audit report quotes an operating ratio of 164 percent on metre gauge against 80 percent on broad gauge as the reason for the policy. In plain terms, metre-gauge lines were spending about ₹164 for every ₹100 they earned, while broad-gauge lines spent about ₹80.
People with money found their own way around it. The Maharani saloon in the Mysore Railway Museum, built in 1899, could run on both gauges. Everyone else changed trains.
Project Unigauge: the date, the plan and the numbers
Project Unigauge began on 1 April 1992. That date comes from the CAG’s 2006 audit report and from answers in Parliament. It is also the first day of the financial year 1992–93, which is why the interim Railway Budget speech of 1996 says the project was “taken up in 1992-93”. Some websites give 1971 or 1990–91 as the start. The official papers do not.
In March 1992 the network measured 62,458 route km: 35,109 broad gauge, 23,283 metre gauge and 4,066 narrow gauge. The CAG puts it as 38 percent metre gauge and 6.5 percent narrow gauge on the day the policy was adopted. The first action plan covered more than 11,000 km, with 6,000 km in the Eighth Plan (1992–97) and 5,000 km in the Ninth (1997–2002). The 1996 budget speech described a bigger first phase, about 14,000 km out of roughly 28,000 km of metre and narrow-gauge lines. The same speech said more than 5,000 km had been converted since 1992–93, against only 3,100 km in the 45 years after independence.
| Year (31 March) | Broad gauge | Metre gauge | Narrow gauge | Total route km | Broad gauge share |
|---|---|---|---|---|---|
| 1947 | 25,170 | 24,153 | 5,225 | 54,548 | 46.1% |
| 1971 | 29,449 | 25,865 | 4,476 | 59,790 | 49.3% |
| 1992 | 35,109 | 23,283 | 4,066 | 62,458 | 56.2% |
| 2005 | 47,749 | 12,662 | 2,924 | 63,465 | 75.2% |
| 2015 | 58,825 | 4,908 | 2,297 | 66,030 | 89.1% |
| 2025 | 67,372 | 894 | 1,173 | 69,439 | 97.0% |

Put the two ends of the Unigauge years side by side and the scale becomes clear. Between March 1992 and March 2025, broad gauge grew by 32,263 km. Metre gauge shrank by 22,389 km and narrow gauge by 2,893 km. The whole network grew by only 6,981 km. Taken roughly, close to four-fifths of the new broad-gauge kilometres were old lines rebuilt to the wider width, and a little over one-fifth was new track. The split is approximate, because some metre and narrow-gauge lines were closed instead of converted. Over the whole period since 1947, the network has grown by 27 percent while broad gauge has grown by more than two and a half times.
The effect was clearest in some states. When Unigauge began, Rajasthan had 77 percent of its network on metre gauge, and Karnataka had 78 percent on metre and narrow gauge together. The 1996 speech expected Assam’s metre-gauge share to fall from 89 percent to 29. Limestone from Jaisalmer could now reach the steel plant at Bhilai without being reloaded, and pilgrim towns such as Pandharpur, Nanded, Ajmer and Tirupati were joined to the broad-gauge network.
What converting a line takes, and what it costs
Converting is not a matter of sliding one rail outward. Wider trains need wider embankments, stronger bridges, bigger tunnel openings and higher platforms. The CAG’s audit found a station on the Miraj–Latur conversion built at a level unsuitable for broad gauge, because broad-gauge platforms have to be higher than narrow-gauge ones. The 1996 budget speech put the work at about 10,000 man-days for every kilometre, which is why it also presented Unigauge as an employment programme.
On three conversion projects the CAG examined in detail, the estimated cost was ₹0.60 to ₹0.89 crore a km and the actual cost came to ₹1.25 to ₹1.58 crore a km. One project ran 28 months late and another 69 months late. More recently, Parliament was told in February 2023 that 42 conversion projects covering 5,667 km, sanctioned at ₹50,250 crore, were at various stages. Of these, 3,488 km had been commissioned and ₹19,235 crore spent by March 2022. Dividing the sanctioned cost by the length gives roughly ₹8.9 crore a km. That is a simple division and not an official figure, and it covers different terrain at later prices, so it cannot be compared directly with the 1990s numbers.
The same answer lists what holds these projects up: land acquisition by state governments, forest clearance, states paying their share of the cost, utilities that have to be shifted, law and order, and how many months of the year the weather allows work.
Was it worth it? There is evidence on both sides. In favour are the operating ratios above, the end of reloading at junctions, and alternate routes for congested trunk lines. Against it, the same CAG report found that 107 of 133 conversion and new-line projects then on the books had been taken up even though they failed the railways’ own test for minimum return. It also calculated that at the 2005–06 level of funding, the pending conversion projects would take another 15 years. Both readings can hold at once. The network did get unified, and some individual projects did not pay their way.
The lines that kept their original gauge
Unigauge was never meant to touch everything. The Parliament answer of February 2023 describes the policy as converting selected routes, except lines identified as heritage lines or those passing through wildlife sanctuaries or national parks. A selection of the lines that still run on their first gauge:
| Line | Where | Gauge | Length |
|---|---|---|---|
| Nilgiri Mountain Railway | Tamil Nadu | 1,000 mm (metre gauge) | 46 km |
| Patalpani–Kalakund | Madhya Pradesh | 1,000 mm (metre gauge) | 15 km |
| Kalka–Shimla Railway | Himachal Pradesh | 762 mm (narrow gauge) | 96.6 km |
| Kangra Valley Railway | Punjab and Himachal Pradesh | 762 mm (narrow gauge) | 164 km |
| Bilimora–Waghai | Gujarat | 762 mm (narrow gauge) | 63 km |
| Darjeeling Himalayan Railway | West Bengal | 610 mm (narrow gauge) | 88 km |
| Matheran Hill Railway | Maharashtra | 610 mm (narrow gauge) | 21 km |
Only three of these are World Heritage Sites: the Darjeeling Himalayan Railway (1999), the Nilgiri Mountain Railway (2005) and the Kalka–Shimla Railway (2008), listed together as the Mountain Railways of India. Matheran and Kangra Valley are on UNESCO’s tentative list and have not been inscribed.
Metre gauge also still carries ordinary passengers in a few places. In February 2023 the Railway Minister told the Lok Sabha that passenger trains were running on ten metre-gauge sectors: Mathura–Vrindavan, Mailani–Bichia, Bahraich–Nepalganj Road, Marwar–Mavli, Mettupalayam–Udagamandalam, Coonoor–Udagamandalam, Veraval–Amreli, Veraval–Delvada, Delvada–Junagadh and Junagadh–Amreli. That list has been changing. The Mathura–Vrindavan conversion, sanctioned in 2017–18 at ₹402 crore, was cancelled for good in June 2025 as uneconomical, after local residents objected to the elevated broad-gauge track. The line is to be kept as a heritage line. If you plan a trip on any of these sections, check the current status first.
India and the rest of the world
Standard gauge, 1,435 mm, is used by roughly 60 percent of the world’s railways. India’s 1,676 mm is shared by Pakistan, Sri Lanka, Bangladesh (alongside metre gauge), Argentina, Chile and San Francisco’s BART, which opened in 1972 on 5 ft 6 in. It is the widest gauge in regular passenger use anywhere.
The Mumbai–Ahmedabad high-speed line, about 508 km long, is being built to standard gauge and not to Indian gauge. A 2015 report by Japan’s JICA recommended it, pointing out that speeds above 300 km/h are run on standard gauge across the world. Some opinion inside the Railways argued for broad gauge, since the rest of the network is broad. So after thirty years of removing gauge differences, the railways are deliberately building one line to a different width, and it cannot share track or trains with the rest of the network. That is not necessarily a mistake. Most high-speed trains in the world are built for standard gauge, and the corridor is a closed system. But it is a gauge difference again, this time by choice. Meanwhile the fast trains on the existing network, Vande Bharat included, run on broad gauge with a top operating speed of about 160 km/h.
Check also: How Train Numbers Are Decided in India: What the 5 Digits Mean
Questions people ask
Are Vande Bharat trains broad gauge?
Yes. They run on the ordinary 1,676 mm track used across the network, at a top operating speed of about 160 km/h.
Is there still a narrow-gauge train in India?
Yes. The Kalka–Shimla and Kangra Valley lines are 762 mm, and the Darjeeling and Matheran lines are 610 mm. In March 2025 narrow gauge totalled 1,173 route km, about 1.7 percent of the network. The Nilgiri line is metre gauge, not narrow.
Why didn’t India choose standard gauge?
The records point to stability. The engineer advising the East India Company in 1846 settled on 5 ft 6 in as a compromise between Brunel’s 7 ft and the 4 ft 8½ in standard, with cyclones as the stated worry, and the Governor-General had wanted something even wider.
Which station has all three gauges?
Siliguri Junction in West Bengal is the one usually named. It once had broad, metre and narrow-gauge tracks together, because the Darjeeling Himalayan Railway starts in that area. Wikipedia’s page on the station now says the metre-gauge line there was later converted, so expect broad and narrow only. Accounts differ, so check with the railway before relying on it.
Will metre gauge disappear completely?
Mostly, yes. Only 894 route km were left in March 2025. But heritage lines and routes through protected forests are exempt from conversion, so a few metre-gauge sections are likely to stay.
What the gauge story comes to
A gauge looks like a small detail until you see what it decided. It decided where a wagon of limestone could travel without being unloaded and which towns the main line reached. For roughly 120 years, from the metre-gauge order of 1871 to 1992, it also decided where passengers had to get down and change trains. The railways now run on one width for over 97 percent of their length. Most of what is left is kept on purpose: hill railways with UNESCO status, branch lines in sanctuaries, and a bullet-train corridor that starts from a clean sheet.
Sources and data note
Figures are for 31 March 2025 unless stated, the latest Railway Board Year Book at the time of writing, checked on 11 November 2026. Conversion work continues in individual sections, so route lengths change every year.
- Ministry of Railways, Lok Sabha Unstarred Question No. 1129 (Gauge Conversion), answered 8 February 2023: eparlib.nic.in
- Comptroller and Auditor General, Report No. 5 of 2006 (Railways), Chapter I, Project Management Practices in Gauge Conversion and New Line Projects: cag.gov.in
- Railway Budget speech 1996–97 (interim), 27 February 1996: eparlib.sansad.in
- House of Commons debate, India – Railway Gauge, 7 March 1873 (Hansard): api.parliament.uk
- W. E. Weld, India’s Demand for Transportation (1920), summary by IRFCA: irfca.org
- 1870–71 Report on Railways, transcribed by FIBIS: wiki.fibis.org
- Route-kilometre series by gauge, from Railway Board Year Books, as compiled on Wikipedia: Project Unigauge; also Broad-gauge railway
- UNESCO World Heritage Centre, Mountain Railways of India: whc.unesco.org, and the tentative list entry for Matheran and Kangra Valley: whc.unesco.org
- Business Standard, Mathura–Vrindavan conversion cancelled, June 2025: business-standard.com
- Business Standard, Bibek Debroy, “Metre gauge”, 2016: business-standard.com
- Indian Railways Fan Club, Gauges in India (FAQ): irfca.org
- DeshGujarat, JICA final report on the Ahmedabad–Mumbai bullet train, 20 July 2015: deshgujarat.com
Read Also: Milestone Colours on Indian Roads: What Yellow, Green, White and Orange Mean

Hi, I’m Aryan, the writer behind IndiaClarity. I write plain-language explainers on how India’s systems, places and history work. Before I publish, I check facts against primary sources such as official records, Parliament answers, Census data and Acts of law, and I list the sources at the end of each article. If you spot a mistake, write to me at 7brewusaofficial@gmail.com and I will fix it.