LPG Cylinder Code Explained: What A-26, B-25 or D-27 on Your Cylinder Really Means

When a new cylinder is rolled into your kitchen, there is a small painted code near the top. C-26. B-27. A-30. Somewhere along the way most of us were told it is the expiry date, and plenty of people have sent a cylinder back because of it.

It is not an expiry date. Indian Oil has said so in plain words: LPG cylinders have no expiry date, only a test due date. That small difference changes how you should read the code, what you should check at the door, and what you should do if the date has already gone by. The rules behind it are public, and they are less well known than the code itself.

It is a test due date, and it works like a deadline

The gas inside does not go bad. What gets old is the steel body, which carries gas under pressure for years, travels on delivery vehicles and sits in damp kitchens and store rooms. So every cylinder is sent for a safety test at fixed intervals, and the code painted on it tells you when the next one is due.

The letter stands for a quarter of the year and the two digits are the year. In a clarification quoted by the fact-checking site Factly, Indian Oil describes the markings as the next due date of testing: A for January to March, B for April to June, C for July to September and D for October to December. Indane’s safety tips for customers put it slightly differently, as the cylinder needing to be tested by the month in which the quarter ends. In practice, treat the last day of the quarter as the limit.

LetterQuarterLast day to be testedExample
AJanuary to March31 MarchA-30 means by 31 March 2030
BApril to June30 JuneB-25 means by 30 June 2025
CJuly to September30 SeptemberC-26 means by 30 September 2026
DOctober to December31 DecemberD-27 means by 31 December 2027

So a cylinder marked C-26 is in date until 30 September 2026. At the time of writing, in November 2026, anything older than D-26 has already gone past its date. That includes B-25, A-26 and C-26. D-26 still has until 31 December 2026.

Where the code sits, and the other marks around it

Labelled diagram of an LPG cylinder showing the stay plate with the test due date code, the neck stamp, the tare weight and the serial number
The painted code on the stay plate is the next test date. The stamped marks tell you about the last test and the cylinder itself.

Look at the three vertical metal strips that join the top ring of the cylinder to its foot ring. They are called stay plates, and some companies call them side collars. The code is painted on the inner face of one of them.

That painted code is only one of several marks on a cylinder, and people often mix them up. The Gas Cylinders Rules, 2016 require permanent markings on every cylinder, stamped on the neck or shoulder: the manufacturer’s, owner’s and inspector’s marks, the standard the cylinder was made to, the working and test pressure, the tare weight and the water capacity. For LPG cylinders the quarter and year of the last test are added there too, together with the code mark of the testing station that did it. Indian Oil’s citizen charter adds the serial number, the ISI mark and the year of manufacture to the things embossed or painted on the cylinder.

What you seeWhereWhat it tells you
A letter and two digits, painted (for example C-26)Inner face of a stay plateWhen the next test is due
A date with a testing station mark, stampedNeck or shoulderWhen the last test was done, and by which station
A weight in kg (tare weight)Stamped or embossed on the cylinderWeight of the empty cylinder, including the valve
Serial number, year of manufacture, ISI markStamped or embossed on the cylinderIdentity and age of the cylinder

If you find two dates on one cylinder and they do not match, that is normal. One is the date of the last test and the other is the date of the next one. The painted letter and digits on the stay plate are the ones that count as the due date. If you cannot tell which mark is which, ask the delivery person or the distributor to point it out.

The numbers people search for, like 15.5 or 15.8, are most likely the tare weight, which is the weight of the empty cylinder. The rules define it to include the valve fitted to the cylinder. For a 14.2 kg cylinder the empty weight usually falls somewhere around 15 to 17 kg, and every cylinder carries its own exact figure. This number is more useful than it looks, because it lets you check the weight of a full cylinder at the door. More on that further down.

Tested first at 10 years, then every 5

This is the part most pages get half right. Under the Gas Cylinders Rules, 2016, every cylinder has to be re-tested to check that it is fit for further service. In December 2023 the Minister of State for Petroleum and Natural Gas told Lok Sabha that the first re-test comes 10 years after the date of manufacture and then every five years after that. A 2013 Lok Sabha reply gave the same schedule and called the process statutory testing and painting. BPCL has also told a High Court that the rule comes from a PESO circular of August 2007.

Many pages say only “every five years”. That is the repeat cycle, and it leaves out the first ten. A cylinder made in 2016, for example, would face its first test in 2026, the next in 2031, then 2036, and so on for as long as it keeps passing.

Timeline showing a domestic LPG cylinder tested first 10 years after manufacture and then every 5 years
The test schedule for domestic LPG cylinders as stated by the Petroleum Ministry in Lok Sabha.

It also explains why the date on a cylinder is sometimes far ahead. One that is new, or only a few years old, can carry a date up to ten years away, and one that was tested recently will carry a date five years away. A-30 on a cylinder delivered today is not a misprint. It means the next test is due by 31 March 2030.

People also ask whether a cylinder can be used after two years. Yes. Its first deadline is ten years after manufacture, so a two-year-old cylinder is nowhere near one.

You may also read that a cylinder has a fixed life of 15 years. That does not match the official position. In 2009 the government told Lok Sabha that there is no fixed life for LPG cylinders; they are tested periodically and go back into circulation when found fit. In its submission to the Orissa High Court, recorded in a judgment of August 2024, BPCL said a cylinder is rejected when it fails the criteria in the Gas Cylinders Rules, 2016, or on reaching 30 years of age, whichever comes first.

What actually happens when a cylinder goes for testing

The checking starts at the filling plant. Each empty cylinder that arrives is checked against its due date. BPCL told the court that cylinders whose test is due are taken off the line and sent to a separate shed meant for pressure testing, and the ministry says such cylinders are not filled or dispatched from the plant at all.

The testing itself is done through repairers approved by PESO, the Petroleum and Explosives Safety Organisation. The main check is a hydrostatic test, which the Gas Cylinders Rules define as subjecting the cylinder to hydrostatic pressure equal to its test pressure. The rules also require that test pressure to be marked on the cylinder.

Some cylinders need repair. The rules call it hot repair: replacing or repairing the valve protection ring, the foot ring or other protective fittings, and removing dents that are within permissible limits. According to the oil companies’ reply to Lok Sabha in 2013, a cylinder gets hot repair only once in its lifetime, and every repaired cylinder is certified by BIS before it goes back into circulation.

A cylinder that passes gets its next due date painted on it. One that fails is marked and kept apart, emptied of gas and pressure, and has its valve removed so it cannot be refilled. It is then destroyed by crushing, cutting or puncturing, and the scrap goes to authorised recyclers. That is how BPCL described the process to the court.

What if your cylinder is already past its date?

A passed date does not mean the cylinder is about to burst. Indian Oil has said, in the clarification quoted by Factly, that no LPG accident has been reported because of an overdue test date. That is the company’s own statement and not independent data, but it sits alongside the oil companies’ 2013 report to Lok Sabha that they had received no specific complaint about expired or old cylinders.

Still, the whole system is built so that an overdue cylinder never reaches your kitchen. Indian Oil says cylinders due for testing do not go to the market and that distributors are told to check this before delivery, and Indane’s customer guidance says not to accept a cylinder whose due date is over. If one turns up, something slipped, and refusing it is reasonable.

Tell the delivery person at the door and ask for another cylinder. If the distributor does not help, Indian Oil’s toll-free numbers for queries and complaints are 1800 2333 555 and 14428. For BPCL and HPCL connections, use the number printed on your cash memo. The 1906 number is for gas leaks, not for this.

If you only notice the date after the cylinder is already connected, ask the distributor to replace it at the earliest. Do not try to get it tested yourself, and never scratch off or repaint the code. Testing happens only through approved facilities, and Indian Oil’s safety guidelines tell consumers never to tamper with or repair the cylinder, the regulator or any other part of the installation themselves.

Delivery day: a 60-second routine

Indian Oil’s citizen charter says consumers should get the cylinder weighed and checked for leaks every time, and should insist on a pre-delivery check and a cash memo. This is the order that works best at the door.

  1. Look at the seal. It should be intact, and the delivery person should break it in front of you.
  2. Find the code on the stay plate and compare it with today’s date. The last day of the quarter is the limit.
  3. Ask for the cylinder to be weighed. A full 14.2 kg cylinder should read close to its tare weight plus 14.2 kg. If the tare weight is 15.8 kg, expect a reading near 30 kg.
  4. Have the cylinder connected to the regulator and the installation checked for proper working and leaks. Delivery staff carry a weighing scale and leak detectors for this.
  5. Share the Delivery Authentication Code, the OTP that comes to your registered mobile number, only after the checks are done.

The order matters. The charter says that once you have acknowledged receipt of a cylinder with the seal intact, the weight correct and the condition good, there is no scope for dispute about it later. Sharing the OTP confirms the delivery, so keep it for last.

The other five-year rule, and why people mix the two up

The cylinder is not the only thing with a five-year clock. Indian Oil asks consumers to get the whole installation, meaning the regulator, the hose and the connection to the stove, inspected by the distributor’s authorised mechanic at least once every five years. It also says the Suraksha hose should be replaced every five years, or earlier if it shows wear or cracks. The ministry’s own list of causes of domestic LPG accidents includes hoses that were not changed in time, worn O-rings and leaks from the stove or the hose.

The two checks are different. The cylinder test is the oil company’s job and happens at a plant, on a schedule you never see. The installation inspection happens in your kitchen, and in practice someone has to ask for it. A cylinder that is well within its date does not tell you anything about the condition of the hose attached to it.

If something does go wrong: the insurance cover

All LPG consumers registered with the oil companies are covered by a public liability policy that the companies take, for accidents where LPG is the primary cause of fire. In the December 2023 Lok Sabha reply, the ministry listed the cover as ₹6 lakh per person in case of death, medical expenses up to ₹30 lakh per event with a limit of ₹2 lakh per person, and up to ₹2 lakh per event for property damage at the registered premises. These are the figures given at that time, so check the current terms with your oil company.

The claim does not start with the insurer. After any accident at your premises, you inform the distributor first. The distributor informs the oil company, and the oil company informs the insurance company, which then decides the claim under the policy terms.

Quick answers to a few more questions

Which standard do LPG cylinders follow?

Domestic cylinders are made to IS 3196 (Part 1): 2006, and Indian Oil also lists Part 3 of the same standard. The Petroleum Ministry says statutory testing is done as per IS 16054.

Is the 17-digit number in my LPG papers printed on the cylinder?

No. The 17-digit LPG ID belongs to your connection, not to the cylinder. It is what you use to find your account for online services and subsidy. It has nothing to do with the test date.

Do composite and private-company cylinders use the same marking?

This article is about the red steel household cylinders of Indian Oil, BPCL and HPCL, which are the ones the official sources describe. Indian Oil also sells composite cylinders of 5 kg and 10 kg, and private suppliers use their own designs. No official explanation of how their test dates are marked could be found, so ask your supplier to show you the date and tell you how to read it.

Can I get my own cylinder tested at a local workshop?

No. Testing is done through PESO-approved facilities arranged by the oil company, and a cylinder has no business being repaired or re-stamped elsewhere. If the date has passed, the fix is a replacement from the distributor.

One habit worth keeping

You do not need to remember any of the rules above. The next time a cylinder arrives, turn it until you see the stay plate, read the letter and the year, and decide whether the last day of that quarter is still ahead of you. It takes about ten seconds, and the oil companies themselves ask customers to do it. If you like this kind of explainer, the same “what does this number mean” logic runs through PIN codes, STD codes, train numbers and vehicle registration numbers, and each of them is explained on this site.

Last updated: 12 November 2026. This article is for general information. For anything about your own connection, your distributor and oil company are the final word.

Sources

1 thought on “LPG Cylinder Code Explained: What A-26, B-25 or D-27 on Your Cylinder Really Means”

Leave a Comment